RT-21 Setup Utility 4.3 |
The RT-21 Setup Utility allows you to manage configuration options and optimize other controller settings from your PC.
New 4.3 version March 2017
Supports all RT-21 versions through 4.x, Includes RT-21 Az-El controller and the new Version 4 RT-21 w/Wifi/IP options
Adds the latest features in the current RT-21.
SETUP Utility now remembers last connected COM port settings.
|
|
|
RT-21 USB Driver s/n <2000 |
USB Driver for RT-21 S/N < 2000. This INF file enables standard Windows driver to be used with these RT-21 units.
|
|
|
RT-21 USB Driver s/n 2000+ |
USB Driver for RT-21 S/N 2000 and higher. This is the standard driver set for the FTDI chip and is part of newer Windows releases and Windows update too.
|
|
|
RT-21 Firmware 4.09 |
UPDATE - August 15, 2017 RT-21 Firmware latest v4 Release along with complete RT-21 revision history and load instructions.
4.09 for s/n 4000 and higher ONLY (v4 ONLY)
.zip includes firmware for K7NV (Prop Pitch) and K0XG units as well.
|
|
|
RT-21 Firmware 3.08.7 |
RT-21 Firmware latest v3 Release along with complete RT-21 revision history and load instructions.
3.08.7 for s/n 2000 to 3999 units (v3 ONLY)
.zip includes firmware for K7NV (Prop Pitch) and K0XG units as well.
|
|
|
RT-21 Az El Firmware 1.04 |
RT-21 Az El Firmware Current Release 1.04 Nov 11, 2015
Adds Brightness Control for OLEDS v2.0
|
|
|
RT-21 Graphical Interface Program |
A graphical RT-21 control program intended for mouse or touchscreen operation by dragging the desired beam pattern to a desired heading. This program supports up to three rotators on one graphical display. We provide a default compass rose background but you can utilize any graphical background you wish. Background Azimuth projection maps centered on your QTH are readily available on the web and can be simply selected for use as your background image.
First Beta version as seen in Dayton 2013.
Works with all versions of the RT-21
|
|
|
RT-21 Console Firmware |
RT-21 Console is a download firmware load for any RT-21 that converts that unit into a control console for another RT-21 controller. Essentially, the RT-21 Console implements a “computer terminal” in an RT-21 unit that sends and receives RT-21 commands over an RS-232 link. Both the rotor connected RT-21, and the RT-21 Console can control the attached rotator, and view headings.
|
|
|
RT-21 Firmware 1.07.n |
RT-21 1.07.4
Old version for RT-21 below s/n 2000. must be 1.nn firmware unit.
Downloads for K0XG, K7NV and RT-21
|
|
|
GH Tracker 1.17 |
Satellite tracking software.
|
|
|
GH Tracker 1.22 |
Newest Version includes MacDoppler UDP interface
|
|
|
 |